Checksum Error On A Database Due To Hardware Problems Mail Flow Down

AIS Monitoring Platform has discovered that the Exchange database has suffered damage at the file system level. The root cause of this problem is frequently because of faulty hardware. This error is caused by a problem in the disk subsystem. The problem in the disk subsystem may be caused by defective disk drives, by outdated or incompatible disk drive firmware, or by outdated or incompatible controller firmware. Sometimes, too much heat around the disk drive subsystem components may cause this error. Damage may occur to the Exchange database in the following three ways: The wrong data is written to the storage media, Data is written to the wrong place on the storage media or Data is damaged or changed after being stored. This impact the mail flow to be down.

Sections on this page


Last modified April 17, 2020