Critical Non Impact


Configuration Backup

A configuration change has been detected and backed up. Impact: If the backup is unexpected, review the backup taken to ensure that it is not malicious.

Configuration Backup Retrieval

Configuration Backup Retrieval

Configuration Restored

It has been detected that the backed-up configuration has been restored to this device.

Default Route Change

It has been detected that the default route for this gateway device has changed from the old route to new route. Possible Cause: A failover internet connection is kicking in when your primary internet connection fails.

Different Subnets

It has been detected that the connected routed interfaces have different subnets. Action to be taken: This is an informational notification. Check the device’s configuration and add the correct subnet to the affected interface. Ensure traffic is flowing through the interfaces over the subnet after the change.

Different VLAN Number

It has been detected that the connected interfaces have different VLAN numbers.

Different VLAN Types

It has been detected that the connected interfaces have different VLAN types.

Distributed File System Replication Is Degraded

It has been detected that the Distributed File System state has transitioned to Degraded. Possible Causes: 1. One (or more) of the member servers is experiencing hardware degradation. 2. Member servers are unable to replicate properly.

Firmware Change On Network Element

It has been detected that the firmware on a network element has changed (upgrade or downgrade).

High Interface Utilization

It has been detected that the interface utilization is greater than the defined thresholds on a device. Impact: Users will experience a slow-down when utilization exceeds the defined thresholds. Response times will become longer than expected, preventing normal business processes from operating efficiently.

High Storage Utilization

It has been detected that this device has exceeeded the storage utilization set. Action to be taken: Check the device to confirm if it is running low on storage resources. Removing unwanted items to clear space will help.

Interface Duplex Mismatch

It is observed that the connected interfaces have different duplex modes.

No IP Address

It has been detected that the interface is not shared by more than one VLAN, indicating that it may not need to be a trunk.

Non Routable IP

It has been detected that the forwarding rule references a non-routable IP. This is referencing to a non-routable IP, indicating a possible misconfiguration. Impact: This will impact the internet routing system.

Packet Discard(s)

It has been detected that packet discards for a device are greater than the defined thresholds. Impact: The packets sent over the network for a remote machine will fail to send or receive. Eventually, they may be lost in transmission. The missing data could cause data inconsistency.

Packet Error(s)

It has been detected that packet errors for a device are greater than the defined thresholds. Impact: The packets sent over the network for a remote machine will fail to send or receive. Eventually, they may be lost in transmission. The missing data could cause data inconsistency.

Printer Input Tray Missing

It has been detected that the printer is reporting a missing input tray.

Printer Low Ink Level

It has been detected that the printer is reporting a low ink level.

Printer Low Paper

It has been detected that the printer is reporting a low paper level.

Printer Out Of Ink

It has been detected that the printer on the network is out of ink.

Printer Out Of Paper

It has been detected that the printer is reporting that it is out of paper.

Printer Output Tray Missing

It has been detected that the printer is reporting a missing output tray.

Printer Paper Jammed

It has been detected that the printer is reporting a paper jam.

Printer Offline

It has been detected that the printer has gone offline.

Recent Vmware Snapshot Not Taken

Recent Vmware Snapshot Not Taken

Route Not Used

It has been detected that the configured route for the interface is not being used.

Spanning Tree Change

It has been detected that the spanning tree port state on this interface has changed from the old port state to a new port state. Possible Causes: 1. The port state has changed to blocking to prevent a loop. A new device may have been added to the network. 2. The port state has changed to listening/learning because the spanning tree has been turned on or the former root bridge is no longer available and is completing convergence.

Stack Switch Member Status Change

It has been detected that the member on the stack switch may no longer be ready. Possible Causes: A new stack member has been added, or a stack member has gone offline or been rebooted and is going through the typical stack sequence to determine priority.

Stack Switch Port Status Change

It has been detected that the port status of this interface is no longer up. Possible Causes: An improperly connected ring, a member switch failure, or a faulty StackWise cable connection can cause a stack partition. A stack partition typically changes configuration and port numbering.

Trunk Port Not Shared

It has been detected that the interface is not shared by more than one VLAN, indicating a possible misconfiguration.

UPS Battery Needs To Be Replaced

It has been detected that the battery may no longer function properly and needs to be replaced.

UPS Low Battery Charge

It has been detected that the UPS battery charge is considerably low.

Virtual Appliance Discovery

A new virtual appliance has been detected and requires approval. Action to be taken: Approve the new collector so it can begin discovering details about your network.

VLAN With No Interfaces

It has been detected that no interfaces were found on a VLAN, indicating a possible misconfiguration.

Vmware Snapshot Limit Exceeded

Vmware Snapshot Limit Exceeded

Vmware Snapshot Repository Size Exceeded

Vmware Snapshot Repository Size Exceeded

Last modified April 17, 2020